1. The three-dimensional welding platform should be kept clean regularly to prevent the platform surface from being worn away by impurities such as iron chipssand.
2. To prevent harmful deformation of the three-dimensional welding platform, the support should be placed at the main fulcrum when assembling the platform. During support, try to adjust the working surface of the platform to be within the horizontal plane.3. To prevent deformation of the three-dimensional welding platform, the workpiece should be lifted off after inspectionmarking is completed,it must not be left on the platform for an extended period.
4. When placing workpieces on the three-dimensional flexible welding platform, be gentle to prevent the surface of the platform from being impacted. If the surface of the platform is impacted by workpiecesother objects, the protruding part caused by the impact should be repaired immediately.
5. Never perform hammering work on the surface of the three-dimensional welding platform.
6. A dedicated cover made of wood boards can be used to cover the platform when it is not in use. It is strictly prohibited to let water droplets fall on the platform.
7. The three-dimensional welding platform should undergo periodic verification,the verification cycle should be determined based on the specific usage conditions, typically every year.
8. When using the 3D welding platform, be careful not to usestore it in humid, corrosive, excessively highlow temperature environments.
After using the 3D flexible welding platform, it should be wiped clean. If it is not used for a long time, it should be coated with anti-rust oil to prevent rusting.
10. Efforts should be made to ensure uniform use of all parts of the three-dimensional welding platform. Avoid local wearconcave areas.
After use, the working surface of the cast iron platform should be wiped clean promptly,then coated with a layer of anti-rust oil. If it is not to be used for an extended period, a layer of butter can be applied, followed by a layer of white paper.
